Eurocom LV220 ViiVA - Manual (Page 190)

Windows XP Information
E - 48 Setting Up SATA RAID or AHCI Modes
E
6. Press Enter and select the Strip Size (best set to default).
7. Press Enter and select the Capacity size (best set to default).
8. Press Enter to Create Volume.
9. Confirm the selection by pressing Y.
10. This will now return to the main menu.
Figure E - 28 - RAID Created
11. Select 4.Exit and press Enter, then press Y to exit the RAID configuration menu.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
RAID Volumes:
ID Name Level Strip Size Status Bootable
1 My RAID RAID0(Stripe) 128KB 149.1GB Normal Yes
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
1 HDT722516DLA380 VDK71GTE17AH6K 153.4GB Member Disk(0)
4 ST380811AS 5PS196TS 74.5GB Member Disk(0)
Intel(R) Matrix Storage Manager option ROM v6.0.0.1022 ICH8R wRAID5
Copyright (C) 2003-06 Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
[ DISK/VOLUME INFORMATION ]
[ ]-Select [ESC]-Exit [ENTER]-Select Menu