Eurocom LV220 ViiVA - Manual (Page 81)

Upgrading The Computer
Upgrading the Hard Disk Drive(s) 6 - 3
6
Upgrading the Hard Disk Drive(s)
The hard disk drive(s) can be taken out to accommodate other 3.5" serial (SATA)
hard disk drives with a height of 26mm (h) (see
“Storage” on page D - 3 ).
1. Turn the computer off and disconnect all peripherals and cables (including tele-
phone lines).
2. Place the computer on a flat stable surface, preferably on a protective covering to
avoid damage to the LCD screen.
3. Locate the hard disk bay cover and remove screw / , depending on which
hard disk you want to replace.
4. Remove the hard disk cover(s) by sliding it(them) in the direction of arrow .

HDD System
Warning
New HDD’s are blank. Be-
fore you begin make sure:
You have backed up any
data you want to keep from
your old HDD.
You have all the CD-ROMs
and FDDs required to in-
stall your operating system
and programs.
If you have access to the in-
ternet, download the latest
application and hardware
driver updates for the oper-
ating system you plan to in-
stall. Copy these to a
removable medium.
Figure 6 - 1
Hard Disk Bay &
Screws
1 2
3
1 2 3 3