Eurocom M660N MILANO User Manual
Page 143
Advertising
Intel Video Driver Controls
Display Modes B - 9
B
To Enable Intel(R) Dual Display Clone
1.
Attach your external monitor to the external monitor port (or TV to the S-Video-Out
Jack), and turn it on.
2.
Go to the Intel Graphics Properties control panel (see
) and click Display Devices.
3.
Click to choose Intel(R) Dual Display Clone (Multiple Display).
4.
Click Apply, and OK to confirm the settings change.
5.
Click Display Settings to adjust the settings for the attached devices.
Figure B - 6
Display Devices &
Settings
Advertising