Tv settings – Eurocom M660N MILANO User Manual
Page 147
Intel Video Driver Controls
TV Settings B - 13
B
TV Settings
If you are using a TV as a display device adjust the display settings as follows:
1.
Use an S-Video cable to connect your TV to the S-Video-Out Jack and turn it on.
2.
Go to the Intel Graphics Properties control panel (see
) and click Display Devices.
3.
Click to choose either Single Display or Multiple Display.
4.
Choose the television as your display device (Single Display), or as one of your
display devices (Multiple Display).
5.
Click Apply, and OK to confirm the settings change.
Function Key
Combination
You can use the Fn + F7
key combination to tog-
gle through the display
options:
• Notebook Only
• External Display Only
• Notebook + External
Display
Make sure you give the
displays enough time to
refresh.
Figure B - 10
Display Devices
with TV