Eurocom M660N MILANO - Manual (Page 98)

Upgrading The Computer
6 - 6 Upgrading the Optical (CD/DVD) Device
6
Upgrading the Optical (CD/DVD) Device
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the hard disk bay cover and remove screws - .
3. Remove the hard disk bay cover .
4. Remove the screw at point , and use a screwdriver to carefully push out the
optical device at point .
5. Reverse the process to install the new device.
Figure 6 - 4
Removing the CD/
DVD Device
1 3
4
5
6
4
5
6
3 2
1