Mportant – EXFO MaxTester Series User Manual
Page 142
Advertising
Maintenance
132
MaxTester Series
Installing or Removing the Power Meter and VFL
5. On the top panel of the unit, locate the power meter.
6. Using a screwdriver, remove the four screws of the power meter.
Note: If you have a protective cover for the power meter bay, keep the screws
close at hand. You will need them to secure the protective cover in place
later.
I
MPORTANT
Do not discard the screws. You will need them to secure the power
meter in its bay when it is back from calibration.
Advertising