EXFO MaxTester Series - Manual (Page 43)

Getting Started with Your Unit
MaxTester Series 33
Installing or Upgrading the Applications
11. When the application prompts you to restart the unit, tap OK.
12. When the configuration wizard is displayed, follow the on-screen
instructions (see Configuring Your Unit At First Startup on page 23).
Note: At this point, if you have used a USB memory key to update your unit, you
can remove it.
C
AUTION
It is normal that your unit restarts a few times during the upgrade
process.
To avoid causing irreparable damage to your unit, do not turn off
your unit or force a power reset during the upgrade process. You
will know that the upgrade is over when the configuration wizard is
displayed.