EXFO BV10 Performance Endpoint Unit - Manual (Page 35)

BV10-100 and BV10-1000 29
6 Introducing the BV10 CLI
This chapter describes the BV10 Ethernet Performance Endpoints
Command Line Interface (CLI), its uses, and its features.
Note: Refer to CLI Command Reference on page 39 for more information on
command definition and syntax.
Command Line Interface
The Command Line Interface (CLI) allows to configure and manage the
operation of the BV10 by sending commands to the BV10 using either the
CONSOLE Port, a Telnet session (LAN or TEST Port), or Secure Shell (SSH)
session (LAN or TEST Port).
Note: Telnet and SSH provide the same functionality except SSH provides a secure
channel. Refer to console telnet|ssh server enable|disable on page 61 for
more information on enabling Telnet or SSH.