Interface lan|test cable auto, Interface lan|test vlan value|none, Interface test cable straight – EXFO BV10 Performance Endpoint Unit User Manual
Page 73: Interface test vlan priority value
CLI Command Reference
BV10-100 and BV10-1000
67
Configuration Commands
interface lan|test cable auto
Description Automatically detects the LAN or electrical Test port cable type:
crossover or straight through (MDI or MDI-X).
This command cannot be sent through the Test port.
Syntax
interface lan|test cable auto
Example
bv10-100> interface lan cable auto
interface test cable straight
Description Sets the electrical Test port cable as straight.
This command cannot be sent through the Test port.
Syntax
interface test cable straight
Example
bv10-100> interface test cable straight
interface lan|test vlan
value|none
Description Sets the VLAN ID of the LAN or TEST port to the specified value, or
disables VLAN (none).
Syntax
interface lan | test vlan value | none
Example
bv10-100> interface lan vlan none
interface test vlan priority
value
Description Sets the VLAN priority of the TEST interface.
Syntax
interface test vlan priority value
Example
bv10-100> interface test vlan priority 1