Fig. 4.4, Fig. 4.5 – EZ-ACCESS PASSPOR User Manual
Page 10
Advertising
Page | 10
6. Locate the wiring connector protruding from the back of the platform and attach to the corresponding
connector on carriage (FIG. 4.4).
If installing a 90° Turn Platform, skip to Step 13 after connecting platform plug.
FIG. 4.4
7. Locate the guard ramp
(included in the box with the platform), the guard ramp pivot plates, the 1/4”-20 x
1/2” pivot plate attachment bolts and guard ramp spacers (included in the hardware bag) then slide the
pivot plates and spacers over the ramp torque tubes as shown (FIG. 4.5).
FIG. 4.5
Advertising