E-Z-GO TERRAIN 250 - Manual (Page 21)

2 - 3
GENERAL SPECIFICATIONS
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
2
MODEL: TERRAIN 250
TYPE: ELECTRIC POWERED TRUCK
MODEL YEAR: 2012
Part No: 618854
PRODUCT SPECIFICATION
TruCourse Technology: Programmable to multiple vehicle terrains, with expanded regenerative braking function, and vehicle charger lockout.
Solid State continuously variable seperately excited speed controller Six, 8 Volt Deep Cycle Batteries
Full torque, reduced speed reverse
Inductive throttle sensor
Dash mounted direction selector switch (Forward-Neutral-Reverse)
Anti-roll back, walkaway braking and alarm
Programmable regenerative braking, acceleration and speed
Input: 120 Volts AC, 50/60Hz, 8 amps Output: 48 Volts DC at 13 amps
Handheld vehicle diagnostics and rounds tracking
Drive Train: Direct motor shaft connected to transaxle pinion shaft
Motor: 48 Volt DC shunt wound, brazed armature, solid copper windings
Battery Charger: PowerWise 48QE high frequency, fully line compensating.10ft (3m) DC Cord. Underwriters Lab. (U.L.) Listed, (C.S.A. Certified)
Transaxle: Differential with helical gears
Brakes: Dual rear wheel mechanical self-adjusting drum brakes. Automatic single point park brake release with
self-compensating system
Cargo Bed: Roto-molded cross-linked polyethelene. Lifts for access to powertrain. Removable hinged multi-position
tailgate requires no latch mechanism
Electrical System: 48 Volt DC, six, 8 volt deep cycle batteries (117 minute minimum, 170 amp-hour @ 20 hr. discharge rate)
CONFIGURATION HIGHLIGHTS
PRODUCT OVERVIEW
Some items shown may be optional equipment
Specifications are subject to change without notice
* Field installed accessories may require installation charges
Power Source
Vehicle Power
Drive Train Motor Shaft Direct Drive
Differential with helical gears
Dash Mounted Forward-Neutral-Reverse
12.44:1
48 Volts DC
Motor Type
Horsepower (kW)
Electrical System
Batteries (Qty, Type)
Key or Pedal Start
Speed Controller
Transaxle
Gear Selection
Rear Axle Ratio
Shunt Wound
3.0 HP (2.2kW) Continuous
48 Volt
Six, 8 Volt Deep Cycle
Pedal Start
Battery Charger 48 VDC PowerWise™ QE, 120 VAC,
UL/CSA
250 Amp Solid State Controller
Performance
Vehicle load capacity
2 Persons
685.0 lb (315.0 kg) (Without Batteries)
Seating Capacity
Dry Weight
800.0 lb (360 kg)
Bed load capacity 500.0 lb (230.0 kg)
Curb Weight 1050.0 lb (476.0 kg
Towing Capacity
18.9 ft (5.76 m)
N/A
Outside Clrnce Circle
Intersecting Aisle Clrnce
500.0 lb (227.0 kg) max load
Speed (Level Ground) 16.9 mph ± 0.5 mph (27.2 kph ± 0.8 kph)
Steering & Suspension
Service Brake
Self-compensating rack and pinion
Leaf springs with hydraulic shock absorbers
Steering
Front Suspension
Rear wheel mechanical self-adjusting drum
Rear Suspension Leaf springs with hydraulic shock absorbers
Self-compensating, single point engagement
Trail Wolf 20 x 11 - 10 (4 Ply Rated) Uni-directional
Parking Brake
Front Tires
Rear Tires Trail Wolf 20 x 11 - 10 (4 Ply Rated) Uni-directional
Body & Chassis
Welded steel with DuraShield™ powder coat
Injection molded TPO
Frame
Front Body & Finish
Steel. Base coat/clear coat Rear Body & Finish
Black Standard Color
Dimensions
Overall Height (No Canopy)
Overall Height (With Canopy)
Wheel Base
Front Wheel Track
Rear Wheel Track
Gnd Clearance @ Differential
Cargo Box Width (inside)
105.3 in (267.0 cm)
48.5 in (123.0 cm)
Overall Length
Overall Width
65.5 in (166.0 cm)
38.0 in (97.0 cm)
44.5 in (113.0 cm)
5.5 in (14.0 cm)
Cargo Box Length (inside) 30.5 in (77.0 cm)
Cargo Box Depth (inside) 7.5 in (19.0 cm)
Cargo Box Capacity 5.9 cu ft (0.17 m3)
Cargo Box Material Roto-molded polyethylene
37.0 in (94.0 cm)
73.1 in (185.0 cm)
49.0 in (126.0 cm) (Top of steering wheel)
Noise & Vibration
Sound pressure; continued A-weighted equal to or less
than 70 db(A)
Highest RMS value of weighted acceleration is less than 2.5 m/s 2
Highest RMS value of weighted acceleration is less than 2.5 m/s 2
The uncertainty of measurement is 0.39 m/s 2
Noise
Vibration, WBV
Vibration, HAV
Measurement methods were applied per the ISO 2631 and ISO 5349
standards under coditions of typical vehicle surfaces.