Maintenance, Light bulb replacement, Fuse replacement – E-Z-GO TERRAIN 250 User Manual

Page 53

Advertising
background image

5 - 7

MAINTENANCE

Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.

5

Unidirectional Tires

Some vehicles may be fitted with unidirectional tires. These tires may be identified by a directional arrow on the side-

wall. Be sure to position the wheel on hub correctly with arrow indicating direction of rotation when moving forward.

LIGHT BULB REPLACEMENT

To reduce the possibility of premature bulb failure, do not touch new bulbs with bare fingers. Use clean, dry tissue or

paper towel to handle the glass portion of the bulb.
For vehicles equipped with lights mounted in the cowl, locate bulb socket on backside of light and turn bulb socket a

quarter turn counterclockwise to unlock and pull out bulb and socket. Insert new bulb and rotate socket a quarter turn

clockwise to secure.
Similarly replace the turn signal light bulb, locate bulb socket on backside of light bar and turn bulb socket a quarter turn

counterclockwise to unlock and pull out bulb and socket. Insert new bulb and rotate socket a quarter turn clockwise to

secure..

To replace the tail and brake light bulb, roll the rubber bezel from around the edge of the taillight and remove lens.

Install replacement bulb and replace lens.

FUSE REPLACEMENT

To replace fuses, locate the fuse block under the driver side seat. Pull out old fuse and replace with a new automo-

tive type fuse. Headlight and taillight bulbs and fuses are available from a local Distributor, an authorized Branch or

the Service Parts Department.

Tire style may vary

1

2

3

4

'Cross Sequence'

Front of

Vehicle

Rotati

on

Rear

Fender

Tail/Brake

Light

Roll Rubber

Bezel Away

From Body

Inside

of Cowl

Headlight

Bulb

Headlight

Casing

Screw

Advertising