Operating procedures – E-Z-GO 2FIVE 4 PASSENGER User Manual

Page 76

Advertising
background image

OPERATING PROCEDURES

Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.

68

2Five Owner’s Guide

Parking Brake

In the event that the vehicle will not move in forward or reverse, the automatic parking brake can be re-

leased using the instructions located on the controller splash shield beneath the seat on the passenger

side of the vehicle. Refer to the Maintenance Procedures section of this manual for in-depth instructions.

High Pedal Disable Feature

High pedal disable prevents acceleration if the key is turned on while the accelerator is depressed.

Starting and Driving

All vehicles are equipped with an interlock system that disables the controller and prevents the vehicle from

being operated while the charger is connected. Unplug the cord from the vehicle receptacle and properly

store the cord prior to moving the vehicle.
To operate the vehicle:

• Place the key in the key switch and turn the direction selector to the direction desired.

• Slowly depress the accelerator pedal to start the motor.

• When the accelerator pedal is released, the motor controls the deceleration. To stop the vehicle more

quickly, depress the

brake pedal.

When the direction selector is in the reverse position, a warning signal will sound to indicate that the vehicle is ready to

run in reverse.

Advertising
This manual is related to the following products: