Maintenance procedures – E-Z-GO 2FIVE 4 PASSENGER User Manual

Page 84

Advertising
background image

Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.

76

2Five Owner’s Guide

MAINTENANCE PROCEDURES

Lifting the Vehicle

Tool List

Qty.

Floor jack .............................................................................................................................................1

Jackstands...........................................................................................................................................4

Wheel Chocks......................................................................................................................................4

Remove payload from vehicle before lifting. No person(s) should be in or on the vehicle while lifting.

To raise the entire vehicle, install the wheel chocks in front and behind each front wheel.

Center the jack under the rear axle tube next to differential housing. Raise the vehicle

and position the jack stands under the frame where the leaf spring mounting bracket is

welded to the frame.

Lower the jack and test the stability of the vehicle on the two jack stands.

Place the jack under the center front of the car just behind the bumper. Raise the vehicle

and position the jack stands under the frame where the instrument panel support is

attached to the frame.

Lower the jack and test the stability of the vehicle on all four jackstands.

Advertising
This manual is related to the following products: