E-Z-GO 2FIVE 4 PASSENGER - Manual (Page 94)

Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
86
2Five Owner’s Guide
MAINTENANCE PROCEDURES
To access the instructions remove three re-usable plastic rivets securing the controller
splash shield to the body and the controller. To remove the re-usable rivets, press the
center of the rivet with the vehicle key, when the center pin snaps into place the rivet can
be removed, repeat the process for each remaining rivet. Turn the splash shield over to
reveal the instructions for releasing the parking brake.
To reinstall the controller splash shield, position the splash shield by aligning the mount-
ing holes with the holes in the body, push the center pin of each rivet upward so that the
top of the pin is above the rivet head.
Place a rivet in each mounting hole of the controller splash shield and push down on the
center pin until the top of the pin is flush with the rivet head.