Maintenance procedures – E-Z-GO 2FIVE 4 PASSENGER User Manual

Page 92

Advertising
background image

Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.

84

2Five Owner’s Guide

MAINTENANCE PROCEDURES

TRANSPORTING VEHICLE

Hauling

To reduce the possibility of severe injury or death while transporting the vehicle:

Secure the vehicle and contents.

Never ride on the vehicle being transported.
The vehicle must be transported in the forward-facing position.
Maximum speed while hauling the vehicle is 70 mph (112 kph).

If the vehicle is to be transported at highway speeds, the seat bottom and controls must be secured. Always

check that the vehicle and contents are adequately secured before transporting. The rated capacity of the

trailer or truck must exceed the weight of the vehicle (see GENERAL SPECIFICATIONS for vehicle weight)

and the load plus 1000 lbs. (454 kg). Secure the vehicle using ratchet tiedowns.

In the event that the vehicle will not move in forward or reverse, the parking brake can be released using the

Run/Tow switch located under the seat on the passenger side. With the switch toggled to the ‘TOW’ position

and the key switch in neutral (N) position, the vehicle will roll freely without activating the reverse warning

beeper or damaging the controller and motor. After moving the vehicle, return the Run/Tow switch to the

‘RUN-STORAGE’ position; leaving the switch in the ‘TOW’ position will drain the batteries.

Advertising
This manual is related to the following products: