Heath Consultants Personal Surveyor (PS200 Series) - Manual (Page 29)

2-5
OPERATION
If configured to ‘SELECT AT START’, i.e. during the
instrument warm-up cycle, the user can enable or disable this
feature from operation during the present power cycle, as
illustrated in Fig. 2-4.
Fig. 2-5 Date and Time
Fig. 2-4 Enable / Disable Motion Sensor
The ‘Man Down’ alarm is latched and generates both audible
and visual alarms. If an alarm is activated, it will be uniquely
data logged.
To cancel the alarm, press and hold the Right Hand (RH)
button .
2.2.5 Date and Time
The date and time from the instrument’s built-in clock is
displayed on the screen during warm-up, as illustrated in
Fig. 2-5.