Heath Consultants Personal Surveyor (PS200 Series) - Manual (Page 77)

6-5
RECHARGE BATTERY
6.1.3 Recharge Instrument using the 12V / 24V
In-Vehicle Charging Adaptor
The 12V to 24V DC USB In-Vehicle Charging Adaptor (Part
No. 64248), as illustrated in Fig. 6-3, is designed to provide
the GMI PS200 series instrument with corrected power for
battery charging. The power transformer is a switch mode dc
transformer operating from a 12 to 24 volt dc supply.
IN-VEHICLE (USB)
CHARGING ADAPTOR
(Part No. 64248)
USB to MINI-USB
CABLE
(incl. in Part No. 64247 Mains Adaptor)
Fig. 6-3 In-Vehicle Charging Adaptor
The Charging / Comms clip (Part No. 64260), supplied with
the instrument, is connected to the base of the instrument as
illustrated in Fig. 6-4. The mini-USB plug from the charging
cable (supplied with Part No. 64247 Mains Adaptor) is then
connected to the clip. The standard USB plug can now be
connected directly into the USB socket on the USB Charging
Adaptor. With all connections in place, insert the adaptor into
the vehicle accessory socket. A red LED on the front of the
USB Charging Adaptor indicates ‘power ON’.