HITEC X2-400: DC/DC Dual Port Charger User Manual
Page 3
INTRODUCTION
01
Congratulations on your purchase of the Hitec X2-400 Multi-Charger. You are now the
owner of a compact multi chemistry battery charger with battery management and integral
Lithium battery balancing features. The X2-400 features four totally independent and
identical 50 watt charging circuits for a total power of 200 watts. As a result, it can simulta-
neously charge or discharge up to 4 separate battery packs.
The X2-400 can be attached to a 12 volt car battery with the include connector you
connect it to a 12 – 18 V DC power supply with a minimum amperage rating of 60 amps.
The Hitec X2-400 is simple to use, but the operation of a sophisticated automatic charger
such as the X2-400 does require some knowledge and education by the user. This
instruction manual is designed to ensure that you can quickly become familiar with the
charger’s functions and capabilities. It is important that you read this instruction manual in
its entirety before attempting to use your new X2-400 charger.
1.
X2-400
Charger
2. Plug-in battery clamps
3. Crocodile clip charging cable
4. 18AWG wire charging cable x 2
5. TP/FP Adaptor
6. XH Adaptor
The Set Contains:
1
2
3
4
5
6