HITEC ENERGY SPORT ESC SERIES - Manual (Page 14)

Programmable Items / Sounds
After plugging in your ESC to your battery pack, within four seconds you will here 4 groups of
two fast beeps. After this, you will hear groups of 4 varying beeps, tones and melodies. This
chart indicates the flow of those sounds and references the programming function for it.
Brake
Options
On / Off
NiCd / NiMh
- - - - - - - - - - - -
High = 22° - 30°
Restore Factory Defaults
−
−
−
−
Reset to Defaults
*_ _* *_ _* *_ _* *_ _*
~ ~ ~ ~ ~ ~ ~ ~ LiPo
Low Voltage Cut-off Threshold
_* _* _* _*
LiPo / NiXx
Low 2.8V / 50%
*_ _ _* *_ _ _* *_ _ _* *_ _ _* Medium 3.0V / 60%
*_ _ _ _* *_ _ _ _* *_ _ _ _* *_ _ _ _* High 3.2V / 65%
V V V V Normal
Timing Setup
- - - -
Automatic = 7° - 30°
- - - - - - - -
Low = 7° - 22°
_**_ _**_ _**_ _**_ Heli Mode 1
~ ~ ~ ~
Programming Tone Reference Chart
_***_ _***_ _***_ _***_ Heli Mode 2
V V V V V V V V V V V V Hard
Heli Governor Mode
_*_ _*_ _*_ _*_ RPM Off
Acceleration
V V V V V V V V Soft
Motor Reverse
W W W W Forward / Reverse
Switching Frequency
// // // // 8 kHz
\\ \\ \\ \\ 16 kHz
Low Voltage Cut-off Type
__-- __-- __-- __-- Reduce Power
--__ --__ --__ --__ Cut Power
LOW VOLTAGE CUTOFF TyPE: [CONT.}