Konig Electronic Indoor pan-tilt IP camera remote video surveillance - Manual (Page 10)

ENGLISH
10
Method 1: Scan for uCare Cam in local intranet
1. Make sure your Smartphone is connected to the same Router
as your uCare Cam. Open up the Smartphone APP “uCare
Cam” and click on the “Click here to import installed
WiFiCam” at the top of the screen.
2. Click on “Search”.
3. You will see a list of UID’s that were found on your local
intranet (Figure XX).
4. Click on the UID you would like to add.
5. Please enter a Camera name (2 to 20 characters) and the
camera password. Default password is 0000. Click “OK” on the
bottom of the screen.
6. You will see the Camera name now in Camera List view. It
should indicate that the Camera is “Online”. To connect to
the Camera, please click on Camera name. If the Camera is
not “Online”, you may need to force Reconnect. To force
Reconnect, click and hold on Camera name. A pop-up window
will give you options to Reconnect, Edit, and Remove Camera.
Click on “Reconnect” then click on Camera name once it
shows “Online”.
Method 2: Scan QR Code at back of uCare Cam
1. Make sure your Smartphone is connected to the internet. Open up the Smartphone APP
“uCare Cam” and click on the “Click here to import installed WiFiCam” at the top of
the screen.
2. Click on “QRCode”. \You are required to have a QR code reader installed on your Android
phone. A popular QR code reader might be “QR Droid”.
3. You will see your Smartphone camera live view. Face your Smartphone camera towards
the QR code found on the back of uCare Cam. Please make sure the QR code is clear and
fully viewable in the screen. Once the QR code has been detected, the APP will display the
UID in the APP window.
4. Please enter a Camera name (2 to 20 characters) and the camera password. Default
password is 0000. Click “OK” on the bottom of the screen.
5. You will see the Camera name now in Camera List view. It should indicate that the Camera
is “Online”. To connect to the Camera, please click on Camera name. If the Camera is not
“Online”, you may need to force Reconnect. To force Reconnect, click and hold on Camera
name. A pop-up window will give you options to Reconnect, Edit, and Remove Camera.
Click on “Reconnect” then click on Camera name once it shows “Online”.
Method 3: Type in 20 digit QR code
1. Make sure your Smartphone is connected to the internet. Open up the Smartphone APP
“uCare Cam” and click on the “Click here to import installed WiFiCam” at the top of
the screen.