Konig Electronic Indoor pan-tilt IP camera remote video surveillance - Manual (Page 3)

ENGLISH
3
Product description:
1. Microphone
2. Light intensity sensor
3. Lens
4. IR LED
5. Loudspeaker
6. Antenna
7. Micro SD card slot
8. 5V DC input
9. IO alarm connector
10. Ethernet connector
Bottom:
• Wifi/Ethernet switch
• Connection for wall mount
• WPS/RESET button
User instructions:
A. Hardware Installation
1. Please find a location to install uCare Cam that is within good WiFi signal reach of your
home Router.
2. If you plan to hang the uCare Cam, you can use the included mounting kit found in inside
box.
3. If the included power cable does not have sufficient length to reach power outlet, please
purchase an extender cable from your local electronics store.
4. Connect the camera power adapter.