Labconco Protector ClassMate Laboratory Hoods 69716 - Manual (Page 39)

35
Product Service 1-800-522-7658
Chapter 4: Theory of Operation and Safety Precautions
CREATED MAY DRAW FUMES
OUT OF THE HOOD.
The use of heat generating
equipment in this hood without the
exhaust system operating properly
can cause damage to the hood.
The Protector ClassMate
Laboratory Hood should be
certified by a qualified
certification technician before its
initial use. The hood should be re-
certified whenever it is relocated,
serviced or at least annually
thereafter.
Ensure that the unit is connected
to electrical service in accordance
with local and national electrical
codes. Failure to do so may create
a fire or electrical hazard. Do not
remove or service any electrical
components without first
disconnecting the hood from
electrical service.
Proper operation of the fume hood
depends largely upon the hood’s
location and the operator’s work
habits. Consult the Prerequisites
Chapter 2, Installation Chapter 3,
and Using your Hood Chapter 5.
Your Next Step
After you understand the theory of operation and safety
precautions, you are ready to proceed to Chapter 5:
Using Your Protector ClassMate Fume Hood.
!