Labconco Protector ClassMate Laboratory Hoods 69716 - Manual (Page 6)

2
Product Service 1-800-522-7658
Chapter 1: Introduction
About This Manual
This manual is designed to help you learn how to
install, use, and maintain your laboratory fume hood.
Instructions for installing optional equipment on your
hood are also included.
Chapter 1: Introduction provides a brief overview of
the laboratory fume hood, explains the organization of
the manual, and defines the typographical conventions
used in the manual.
Chapter 2: Prerequisites explains what you need to do
to prepare your site before you install your laboratory
fume hood. Electrical and service requirements are
discussed.
Chapter 3: Getting Started contains the information
you need to properly unpack, inspect, install, and
certify your laboratory fume hood.
Chapter 4: Theory of Operation and Safety Precautions
explains how the Protector ClassMate operates and the
appropriate precautions you should take when using the
fume hood.
Chapter 5: Using Your Protector ClassMate discusses
the basic operation of your fume hood. Information on
how to prepare, use and shut down your Protector
ClassMate are included.
Chapter 6: Maintaining Your Protector ClassMate
explains how to perform routine maintenance on your
fume hood.
Chapter 7: Modifying Your Protector ClassMate
describes how to install the optional equipment on the
fume hood.
Chapter 8: Troubleshooting contains a table of
problems you may encounter while using your
laboratory fume hood including the probable causes of
the problems and suggested corrective actions.