Lamar Technologies BETA D-50 - Manual (Page 7)

2. INSTALLATION
2.3 SPACE REQUIREMENTS
The Beta D-50 system occupies 15" x 10 ¼" (381 mm x 260 mm) of table top space.
Place the unit on a sturdy workbench in a well-ventilated battery servicing area with the
battery adjacent to it.
The rear of the unit has air flow from hot resistors. Allow at least 6" (150 mm) of
separation from the wall and adjacent equipment in order to maintain proper air flow.
WARNING: Due to the air flow from hot resistors on the
rear of the unit, use extreme caution on placement.
NOTE: In non air-conditioned rooms it is recommended
that circulating or extracting fans be used to aid in the
removal of heated air.
NOTE: Operation in dusty or otherwise dirty air
environments will severely reduce the cooling capacity of the
fans and can lead to premature failure.
BETA D-50 TESTER / ANALYZER - OPERATING MANUAL V2.2 Page 5