Lingenfelter L300046006 Lingenfelter C6 Z06 Corvette High Capacity Oil Tank 2006-2008 v1.0 User Manual
Page 8
Page 7.
18. Remove the tank from the car by having one
person pull the tank down through the bottom
of the fender while the other person carefully
moves the tank out of the way of the wiring
harness as well as any other obstructions.
19. Mark the top and bottom portion of the tank as
shown. You will use this to reference putting
the assembly back together correctly, notice
the location of the oil line fittings on the stock
lower tank.
20. Using a 13 mm socket and extension, remove
the eight (8) nuts and bolts on the tank to
separate the top and bottom of the tank. You
will need a deep well socket or an open end
wrench to remove the two bolts (in which the
tape is in between) indicated to the left.
21. Inspect the top of the tank for damage or
corrosion. Be sure to wipe the mounting
surface clean before installation on the new
tank.