Lingenfelter L300046006 Lingenfelter C6 Z06 Corvette High Capacity Oil Tank 2006-2008 v1.0 - Manual (Page 9)

Page 8.
22. Using a 13 mm socket, remove the two
(2) mounting brackets from the old tank by
removing the four (4) bolts on the brackets.
Install the old brackets to the new tank and
torque to 18 lb-ft (25 Nm).
23. Using a 19 mm socket, replace the oil
temperature sensor and tighten to 15 lb-ft (20
Nm) of torque.
24. Remove the oil screen from the old tank by
gently twisting, wiggling, and pushing the
screen towards the outside. Install the oil
line screen onto the new tank by pushing the
screen into the inlet bore from the outside of
the tank until the locking tabs locate in the
grooves.
IMPORTANT: The oil screen is fragile and
expensive to replace so handle with care.
25. Inspect the O-ring and engine oil tank gasket
from your old tank to your new tank