Lingenfelter L460105297 Lingenfelter LNC-003 Dual RPM Launch Controller v2.7 - Manual (Page 2)

Parts List
# Part number Description
1 LNC-003 LPE Dual RPM Launch Controller
1 72” trigger wire harness (part of PN LNC-003)
2 Hook & loop tape, 3.5” length
4 AV16037 Self-tapping screw
1 L450080000 Transient voltage suppression (TVS) diode kit
1 L950050000 LPE technician’s screwdriver
1 L920010000 LPE decal
1 Instructions
Optional Items
• Additional transient voltage suppression (TVS) diode L450080000
• STOV-002 MPH activated switch L460050000
• CTAP-001 Clutch and Throttle actuated position switch L460190108
• CTAP Plug-And-Play harness for Corvette, Camaro & CTS-V L480370108
• Sealed 40 amp heavy duty relay kit L450100000
• LPE microswitch kit L480330000
• LED for indicator light
• Red 12 vdc LED with 30 cm leads L450030000
• Green 12 vdc LED with 30 cm leads L450040000
• Red LED lighted paddle toggle switch, 20 amp DC-7600500
• Connector, AMP Mate-N-Lock, Female 1-pos 571-14803490
• Connector, AMP Mate-N-Lock, Male 1-pos 571-14803510
• Connector, AMP Mate-N-Lock Pin, 24-18 AWG 571-606181
• Connector, AMP Mate-N-Lock Socket, 24-18 AWG 571-606171
Specifications:
• Custom molded high temperature glass filled Nylon 6 enclosure with direct access to the controller
settings without requiring removal of a cover or access panel.
• 40 MHz 16-bit automotive qualified processor with eight channel Enhanced Time Module.
• Each coil drive circuit has a dedicated timer to keep the timing accurate over the full RPM range.
• Independent coil drive provides Sequential Ignition Kill when RPM limiting is active.
• Reverse battery protection.
• Both of the activation inputs have active clamps and optical isolation to suppress electrical noise
from external solenoids (such as trans brake and line lock).
• Digital filter provided in software to further isolate electrical noise on the activation inputs.
• Separate Primary and Secondary RPM x100 & RPM x1000 switches for easier setting adjustments.
• RPM limiter activation point can be adjusted from 1500 to 9,900 RPM in 100 RPM increments.
• Ground Activation and +12 Volt Activation inputs for the Primary RPM limit activation.
• Dedicated +12 volt activation input for the Secondary RPM limiter.
• True plug-and-play coil pack connection design for ease of installation and removal.
• Fully encapsulated (potted) construction for added durability.
• One year warranty (from date of purchase).
Page 1 of 17