Lingenfelter L710671005 Lingenfelter Trailblazer SS & SSR Fuel Pump Upgrade Kit v1.8 - Manual (Page 2)

Parts List
# Part number Description
1 TI-GSS341 TI/Walbro fuel pump
1 TI-94-615 GM fuel pump adapter wire harness
2 12077411 Metri-Pak terminals
1 LN0067-001 LPE fuel pump spacer ring, TBSS & SSR
1 52545 K45 Oetiker clamp
1 22682111 fuel sender O-ring seal
1 L920010000 LPE decal
1 installation instructions
Optional Items
• Kenne Bell Boost-A-Pump (20 amp model listed, 40 amp model can also be used)
• PN KB-89066 for naturally aspirated applications (vacuum trigger switch)
• PN KB-89067 for boosted applications (pressure trigger switch)
• new fuel pump module with fuel filter and inlet sock (TI-TU454-1)
Tools Needed
• small pocket screwdriver
• sharp knife or razor blade
• wire cutters
• hook tool (can also use small screwdriver)
• wire stripping tool
• wire crimping tool
• Oetiker clamp crimping tool or diagonal cutter
• terminal pin tool
Fits The Following Vehicles
• 2005-2006 Chevrolet SSR (6.0L LS2 engine)
• 2006-2007 Chevrolet Trailblazer SS (6.0L LS2 engine)
• 2006-2007 Buick Rainier, Chevrolet Trailblazer, GMC Envoy, Isuzu Ascender, Saab 9-7X with 4.2L
L6 and 5.3L V8 engines
• May also fit some other 2005-2007 ST155, ST157 and ST158 GM trucks
• Fits GM part # 19153374 fuel pump module & AC Delco fuel pump module M10087
• DOES NOT FIT 2003-2004 Chevrolet SSR (5.3L engine) or other 2003-2004 ST trucks
Installation note for high mileage vehicles:
If you have a high mileage vehicle, we recommend changing the fuel filters inside the module. The
primary fuel filter and the inlet filter sock are not currently available as service parts from GM so
changing these filters requires purchasing an all new fuel pump module. Complete fuel pump modules
are available from LPE (see part number listed above).
Page 1 of 5