Lingenfelter L710671005 Lingenfelter Trailblazer SS & SSR Fuel Pump Upgrade Kit v1.8 User Manual
Page 3
Advertising
Page 2 of 5
Installation Instructions:
1) Follow the GM service instructions for removing the fuel pump module from your vehicle. Service
manuals are available from Helm Inc. ( http://www.helminc.com ).
2) Unplug all the wires from the bulkhead connector at the top of the
module.
3) Carefully remove the outer “bucket”
from the fuel pump module assembly.
4) Using a small pocket screwdriver,
carefully pry the fuel sock (fuel pump
inlet filter) from the center pin on the
bottom of the fuel pump. Save the fuel
sock. You will be reusing the fuel sock
when you reassemble the module.
5) Using wire cutters, clip the small
ground wire as close to the fuel pump
terminal as possible.
Advertising