Livorsi TTK1050EL - Manual (Page 3)

Billet Trim Tab Installation
3 of 11 715 Center Street Grayslake IL 60030 P: 847.752.2700 E: [email protected] www.livorsi.com
REV B MAY 2015 TTK EL Models
2x stainless steel oil lines
Port mount
sensor wires
Plug
Using the template:
Once the location is determined, use the supplied template for drilling holes.
The template will need to be printed on 11”x17” paper (minimum), template scale is 1:1. When
printing make sure your print settings do not resize the document, keep it at 100% or disable any
scale options.
Example of the Livorsi bolt pattern
Thru hull bolts
Bottom plate area
Depending on your tab model, if equipped with an electric sensor, only drill one hole for the
wire access thru the transom.