Livorsi TTK1050EL - Manual (Page 7)

Billet Trim Tab Installation
7 of 11 715 Center Street Grayslake IL 60030 P: 847.752.2700 E: [email protected] www.livorsi.com
REV B MAY 2015 TTK EL Models
Sensor Wiring
The sensor wire leads that were fished thru the transom will need to be inserted in to the 6 pin
Deutsch connector and secured with a wedge lock. Below is the pin out.
Pin Number Wire Color Description
1 Red PPS1 (5V)
2 White PPS2 (5V)
3 Blue PPS1 Signal
4 Black PPS1 Ground
5 Green PPS2 Ground
6 Tan PPS2 Signal
Once pins are pushed thru the connector,
insert the wedge lock to secure pins.
The “arm” of the wedge lock should face the
same side as the connector clasp.
wedge lock
wedge “arm” connector clasp
connector
sensor wires
from trim tab