Lumagen Radiance 2020 - Manual (Page 40)

Section 12 – Specifications
Radiance 2020 rev 102214 35
Section 12 – Specifications
Inputs
•
4 HDMI
®
1.4a with 3D at up to 1080p60
Processing
• Proprietary Lumagen No-Ring™ scaling
• Darbee Digital Visual Presence™ (DVP™) enhancement technology
•
10-bit processing for deinterlacing plus a 12-bit calibration pipeline
• Support for HDMI
®
1.4 “3D” including anamorphic lens scaling
• Convert common optional 3D formats to a required format support by the display
• Each input has 4 user configuration memories
•
Each input user configuration memory has 8 resolution sub-memories (for HD inputs)
• Each resolution sub-memory is linked to one of 8 output configurations.
•
2:2, 3:2 and 3:3 pull-down for SD/HD film sources
• Per-pixel SD/HD video de-interlacing
•
Adaptive diagonal filtering
• MPEG mosquito and block artifact reduction
•
Temporal noise reduction for SD and HD sources
• Output resolution up to 1080p60
• User programmable non-linear-stretch (NLS) mode
•
4:3, LBOX, 16:9, 1.85, 2.35, 2.40 and NLS input aspect ratios
• Programmable output aspect ratio from 1.10 to 2.50
•
Extensive support for anamorphic lenses for both 2D and 3D video
• Large suite of test patterns
• Parametric grayscale and Gamma calibration
• Full CMS (Color Management System) using a 729-point 3D linear-gamma RGB color palette
• 21-point parameter grayscale and Gamma
•
Programmable input/output color-space
• Y/C-delay calibration
•
CUE and ICP filtering
Outputs
• 2 HDMI 1.4a, with 3D
• Maximum output rate of 1080p60
• Eight channel audio at 192 kHz
• Supports DD True-HD™, and DTS Master Audio™ bitstream formats
• Each HDMI output can provide “stand-by” power to external device of +5V at 50 mA
Miscellaneous
•
IR and RS232 control (See Tech Tip 11 and 12 on the www.lumagen.com website)
• Wired IR format command input
•
Universal, 100-240V, ~50/60Hz external 12 VDC power supply
• Power consumption: 25 Watts including external power supply