Lumagen Radiance 2020 - Manual (Page 6)

Section 1 – Getting Started
Radiance 2020 rev 102214 1
Section 1 – Introduction
Thank you for purchasing a Lumagen ® Radiance™ video processor. The award winning Lumagen Radiance
video processor family boasts the highest-performance video switching, processing and calibration available.
This makes it ideal for premium quality high-definition home and commercial theater applications.
Lumagen’s Radiance series refines and enhances the video images presented by high definition front
projectors, top-level rear-screen and flat-panel displays.
The Radiance family offers 10-bit front-end, and 12-bit back-end, processing, per-pixel standard definition
(SD) and high definition (HD) video de-interlacing with adaptive diagonal filtering, No-Ring™ scaling
technology that does not add ringing (unlike competing products), MPEG mosquito and block artifact
reduction plus “3D” temporal noise reduction for both SD and HD sources. It supports HDMI
®
1.4 “3D” and
uncompressed audio formats for Dolby-Digital TrueHD™ and DTS Master-Audio™ bitstream formats.
At the same time Radiance processors can function as a central switching hub for the audio video system.
For these reasons, the Radiance™ processor family sets the industry benchmark for switching, calibration
and video processing performance.
Key Features
• Maximum output rate of 1080p60
•
Proprietary Lumagen No-Ring™ scaling
• Darbee Digital Visual Presence™ (DVP™) enhancement technology
•
Full CMS (Color Management System) using a 729-point 3D linear-gamma RGB color palette
• 21-point parametric grayscale and Gamma
•
10-bit processing for deinterlacing plus a 12-bit calibration pipeline
•
Support for HDMI
®
1.4 “3D” including anamorphic lens scaling
•
Convert common optional 3D formats to a required 3D formats supported by the display
• Each input has 4 user configuration memories
•
Each input user configuration memory has 8 resolution sub-memories (for HD inputs)
• Each resolution sub-memory is linked to one of 8 output configurations.
• 2:2, 3:2 and 3:3 pull-down for SD/HD film sources
•
Per-pixel SD/HD video de-interlacing
• Adaptive diagonal filtering
•
MPEG mosquito and block artifact reduction
• Temporal noise reduction for SD and HD sources
•
Output resolution from 480p to 1080p, plus 1080i
• User programmable non-linear-stretch (NLS) mode
•
4:3, LBOX, 16:9, 1.85, 2.35, 2.40 and NLS input aspect ratios
• Programmable output aspect ratio from 1.10 to 2.50
• Extensive support for anamorphic lenses for both 2D and 3D video
•
Large suite of test patterns
• Programmable input/output color-space
•
Y/C-delay calibration
• CUE and ICP filtering
•
Eight channel audio up to 192 kHz, DD True-HD™ 5.1, and DTS Master Audio™ 5.1 Bitstream
• IR and RS232 control inputs (See Tech Tip 11 and 12 on the Lumagen.com support page)
• Wired IR format command input
•
Universal, 100-240V, ~50/60Hz external 12 VDC power supply