LW Measurements BWS NTEP Weighing Platform Scale 500lb - Manual (Page 12)

BW/BWS Series Indicator Technical Manual
- 9 -
5.2. Check Weighing
It can set an upper or lower limit when weighing with the limits range.
During the limit controls dividing the unit will indicate whether a value
upper or lower limits with an alarm sound .
5.2.1. Set Limits

Press and key together, display will be show set h.

Press key to select set h or set l

Press key to confirm, display will show 00000 and will blink the last
digit.

Enter the high limit value by using and keys to change the
active digits and press key to increment the value.

Press key to confirm, display will show set l

Enter the high limit value by using and keys to change the
active digits and press key to increment the value.

Press key to confirm.

To escape from the settings press key.
5.2.2. Set Check Weighing

Press and key together, display will be show set h.

Press key to select display beep.

Press key to confirm, display will be shown none or ok or ng

Check mode none : No beep sound in the limits. Function turned off.

Check mode ok : When the weight is between the limits. OK will shown