Mighty Mule FM702 - Manual (Page 10)

6
IMPORTANT SAFETY INSTRUCTIONS
Install Warning Signs
Entrapment Protection
Inherent obstruction settings, even when properly adjusted, may not be sensitive enough to prevent bodily injury in some
circumstances. For this reason, safety devices such as safety edge sensors (or photoelectric sensors), which stop and reverse
gate direction upon sensing an obstruction, are suggested for augmented protection against entrapment.
Required Safety Precautions for Dual Gates
Warning Signs
The warning signs (at right) must
be installed on both sides of each
gate leaf (see page 7 for details).
Warning signs alert people of automatic gate operation and are recommended when installing the Mighty Mule Gate
Opener
® . Furthermore, a walk-through gate must be installed if pedestrian traffic is expected near the vehicular gate. We
recommend using the GTO Bulldog Pedestrian Gate Lock (Call the GTO Sales Department) for controlled access.
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or
play in gate area.
3. This gate is for vehicles only. Pedestrians
must use a separate entrance.
Moving Gate Can Cause
Injury Or Death
WARNING !
Warning Sign Warning Sign
Contact Sensor
( recommended, not included )
Contact Sensor
( recommended, not included )
Pedestrian Gate
Bulldog Pedestrian
Gate Lock
(recommended, not included )
Vehicular Gate Vehicular Gate
Contact Sensor
( recommended, not included )
Contact Sensor
( recommended, not included )