Mighty Mule FM702 - Manual (Page 43)

39
Low Voltage Wire (RB509)
The 16 gauge, multi-stranded, dual
conductor Low Voltage Wire connects the
AC powered transformer or the solar
powered battery charger (Solar Panel) to the
control board. Also used for the connection
of accessories, such as locks, keypads, push
buttons and other wired control devices.
This specially designed wire is UV treated,
PVC coated and ready for direct burial.
Available in 1000' rolls or special lengths.
The Following Accessories Are Available Through Your
Retail Store's Special Order Desk.
Dual Transmitter (RB742)
The Dual Transmitter is a two button transmitter for remote
control of two separate gate openers, or a gate opener and
garage door opener (see Garage Door Receiver). Battery
included.
Triple Transmitter (RB743)
The Triple Transmitter is a three button transmitter for
remote control of three separate gate openers and/or garage
door openers (see Garage Door Receiver). Battery
included.
Garage Door Receiver (RB709)
The Garage Door Receiver allows you to use the same Mighty
Mule
® entry transmitter (see dual and triple transmitters) to
operate your gate opener and your garage door opener. Compatible
with most garage door openers.
Column Mount Lock Receiver (433IH)
For mounting the Automatic Gate Lock (FM143) on
brick columns, walls, or for other applications with limited
space between gate and post.
HEDDOLF UNIVERSAL RECEIVER MODEL 294
If you have a question about any special order item, just call 1-800-543-GATE!
Push To Open Bracket (348IH)
Required when the Mighty Mule Gate Opener ® must
push the gate open, such as on a sloping driveway, or
where space prevents gate from being pulled open.
Power Cables
The AW201 four and one-half foot power cable is included with Mighty Mule ®
gate opener systems.
The AW202, AC108, and AC109 twenty-five, thirty-five, and forty foot
(respectively) power cables allow you to mount the control box in a remote
location.
Gate Opening Sensor (FM138)
The Gate Opening Sensor is designed for residential and
agricultural applications and is compatible with the Mighty
Mule automatic gate opener models. The Gate Opening
Sensor is an electromagnetic sensor, which offers 'hands free'
operation of the Mighty Mule Automatic Gate Opener with a
12 ft. radius of detection of vehicles in motion.