Mighty Mule FM702 - Manual (Page 32)

28
Step 40
Plug the transformer into the electrical outlet.
(Use of a surge protector with the transformer is strongly
recommended.)
HINT: Keep a few mothballs in the control box to
discourage insects from entering it and damaging the
control board.
Step 41
Turn control box ON.
Step 39
Strip 1 / 2 " of insulation from the ends of the low
voltage wire. Attach these stripped ends to the
transformer terminals; red wire to RED,
black wire to BLK.
A dab of household petroleum jelly on each terminal
will help prevent corrosion.
We suggest crimping a spade tongue terminal (not
provided) to the end of each wire before attaching it
to the transformer.
Make sure the exposed wires do not touch each
other!
SURGE PROTECTOR
Transformer
Black
Red
Spade Tongue Terminal
(not provided)