MOCET IP Commander - Manual (Page 32)

Page 32
IP Commander for iOS VoIP User Manual
5.4.1 DID Setting
If a SIP line has no DID, Hunting group, or Ring group setting, an incoming call from
this SIP trunk will ring all the handsets including base handsets and all DECT
handsets. To configure a DID setting to a specific DECT handset for a SIP line,
please follow the following steps:
1. Select “Settings” command from the main menu.
2. Select “DECT Settings” from the sub-command area
3. Select “DECT Line Settings” from the sub-command area
4. Select the line you want to do DID setting
5. Select “Tap to Select” to pop up a “Select DECT Type” menu
6. Select “Direct Inwards Dialing” from the pop-up menu
7. A new menu on the sub-command area for ask you to select a DID Handset
8. Select the DID handset for this line
9. Press “Save” to confirm the settings
Settings -> DEC Settings ->DECT Line Settings
-> Line x -> Tap to Select -> Direct Inward Dialing