MOCET IP Commander - Manual (Page 34)

Page 34
IP Commander for iOS VoIP User Manual
Settings -> DEC Settings ->DECT Line Settings -> Line x
-> Tap to Select -> (Ring Group) or (Hunting Group)
Select Handsets for Line 1 Ring or Hunting Group
5.5 Outgoing Call Configuration
The Communicator’s DECT base station allows each DECT handset to make an
outgoing call via preferred SIP lines. Its benefit is to let different person can share
the same Communicator DECT system but use different SIP line for individual billing.
To configure the SIP line preference for each Handset, please following the following
steps:
1. Select “Settings” command from the main menu.
2. Select “DECT Settings” from the sub-command area
3. Select “DECT Handset Settings” from the sub-command area
4. Specify the SIP line priority for outgoing call for each Handset
5. Press “Save” to confirm the settings