MOCET IG7200 User Manual
Page 23
23 / 53
4.5.4. UPNP
Universal Plug and Play (UPnP) is a set of networking protocols that permits
networked devices, such as personal computers, gateways, Wi-Fi access
points and mobile devices to seamlessly discover each other's presence on
the network and establish functional network services for communications.
IG7200 use sub-function of UPnP – PMP(NAT Port Mapping Protocol) to
allows IG7200 at a private network (behind a NAT router) to automatically
configure port mapping table in the router and can allow out-parties on
public network to contact it.
Figure 8 Network settings-UPnP
Port Mapping need to Config on NAT Router
1. SIP – 5070, SIP Signal Port, Editable
2. Web – 8800, Web Remote Access Port, Not Editable
3. IGCP – 38600, IG private protocol port, Not Editable
4. RTP – 30000 ~ 300015, RTP Media Port, Editable
5. IP-Cam – 5678 ~ 5685, IP-Cam use Port, Not Editable