MOCET IG7200 - Manual (Page 36)

36 / 53
4.6.4 IP Camera
IG7200 can connect with IP camera and support remote video monitor function.
User can access to IG7200 IP-Cam and do video monitor.
System can support third party IP-Cam and MOCET IP-Cam. For third-party
IP-Cam, user must correct Config the IP-Cam and fill its network and related
device parameters in IP-Cam table. For MOCET IP-Cam, user can easily
complete programming process through PNP function.
Figure 32 IP Camera
„
IP-Cam PNP Operation
1. Do Reset to default action on IP-Cam
2. Connect IP-Cam to IG7200 LAN port with RJ45 cable.
3. Press Pairing Button when IP-Cam reboot complete.
4. IG7200 will automatically send network and system parameters to IP-Cam.
5. IP-Cam reboot and work through wifi connection.
„ Condition
1. IP-Cam will reboot after PNP operation success，otherwise, PNP operation
is considered as fail if IP-Cam does not begin reboot operation.
2. User must make sure IP-Cam process reset to default operations before
PNP process.
3. Pairing button will be dark when IP-Cam PNP operation is done, or will be
dark when 60s is timeout.