MOCET IG7200 - Manual (Page 33)

33 / 53
Mobile number : The mobile number can show the smart phone’s mobile
number, if a smart phone is registered, the mobile number will
synchronize with smart phone and showed on here.If the user is not
registered, other users can dial the mobile number by system IG7200 to
make call to the user.
Pair State
: If the smart phone is registered successfully by PNP (plug
and play) mode and synchronized successfully, the state will show “Pair
success”, else it shows “initial”.
Status : You can enable or disable the status, if the status is disable, the
number cannot be registered.
Action:
You reset phone registration data, if the registration data is reset,
the number will become “Not Registered”.
ICM-DND : You can enable or disable ICM-DND. All ICM call will be
restricted to ring SMP when this flag is checked. Default is disable.
Trunk-DND
: You can enable or disable Trunk-DND. All PSTN trunk call
will be restricted to ring SMP when this flag is checked. Default is disable.
You can modify the phone register configuration here, you can select an
account and click “modify” to edit the configuration.
Figure 29 System-Smart phone-Modify
4.6.2 C.O. Line
This page allows administrator to adjust signal gain and voltage for C.O. line.