MOCET IG7200 - Manual (Page 32)

32 / 53
4.6 System Settings
Use the System screen to configure the IG7200’s voice related parameters.
It allows system administrator to configure SMP client.
4.6.1 Smart Phone
The IG7200 combines Proxy and Register servers in its application. All
phones registered to the internal Register server are set here; it provides 6
phones to register.
Figure 28 System-Smart phone
User Number
: The user number is 10~15.
Display name
: The display name is a name for this phone, if the phone
make call, the name will show on the callee’s screen. It synchronizes
from the smart phone when the phone is registered.
Password
: The user password of this phone. The length is up to 24 digits
or characters. It’s used for Digest Authentication.
State
: The state can show the state of the phones, if the phone is
registered, it will show “Registered”; if the phone is not registered, it will
show “Not registered”.
MAC : The MAC can show the MAC of the registered phone, if a phone is
registered, its MAC will be shows on here.