Pitney Bowes AnySite - Manual (Page 10)

10 AnySite v9 Install Guide
Evaluation Version Users
If you currently have an evaluation version of AnySite installed on your machine, you must uninstall the evaluation version prior
to installing the full version.
MS Windows 7 Users
Windows 7 has an “AutoPlay” which may result in a “View Files” dialog box prompting for action to pop up after inserting an addi-
tional disk. Ignore this message and close with the red X.
When prompted for an additional disk after the initial Installer Disk, do not select OK until the initial disk has been removed, the
requested disk inserted, and the machine has loaded the disk. Once you know the machine has loaded the disk, then click OK. The
Cancel button is for locating the image from another drive or network.
Installing to a Local Machine (Single User)
Note
If users are existing clients and have AnySite installed (versions 8.8.X or earlier) and wish to retain their custom files,
please see Chapter 5 Upgrading Your Current Installation, before beginning installations. If this step is not done, custom files,
custom thematics, reports, Hotspots, etc. will not be available.
To Install AnySite onto a local machine:
1. Place the AnySite Installation DVD in the media drive.
The AutoPlay screen displays, select Open folder to view files and double-click setup.exe.
If the AutoPlay screen does not automatically start, click Run from the Microsoft Start menu, and click the Browse button.
Go to the media drive and select Setup.exe.
Note: If the .NET Framework Pending screen appears, then you do not have a compatible version of Microsoft .NET
Framework installed. Microsoft.NET Framework version 3.5, SP1 is required to run AnySite. (For information about the
Microsoft.NET framework, see www.microsoft.com/net.) If the Pending .NET Framework dialog does not appear, skip to
step 3.
Installing the .NET Framework
2. The Pending .NET Framework dialog appears.
Click Install to continue.
The screen, Installing .NET, appears with a progress bar indicating the status of the installation process.
3.When .NET installation completes, the AnySite Welcome screen appears. Click Next to continue.