Pitney Bowes AnySite - Manual (Page 34)

34 AnySite v9 Install Guide
Launching AnySite
If you have not yet run the final system configurations using the Configurator, then you must do so first. See Final System Con-
figuration on page 31.
Note You must reboot the system before running AnySite for the first time.
To start AnySite:
1.Either click the AnySite icon on your desktop or click Programs > MapInfo > AnySite XX in the Microsoft Start menu.
2.The Login dialog opens, enter the default user name and password when prompted: type Administrator for the
users name and leave the password blank. Click OK to proceed. Usernames are case sensitive so make sure and
use a capital “A” for Administrators.
Note If you receive the message “data not found”, then proceed to Handling Data Not Found Messages.
AnySite opens refer to the Tutorial section in the AnySite Reference for an overview of how to work
with AnySite.
Handling Data Not Found Message
The first time you launch AnySite, you may be prompted to locate the data file if they are installed to a non-default location.
Drive Time Data Not Found
When launching AnySite the first time, you may get a Drive Time Data Not Found message regarding the location of the
Drive Time Data. Use the browse button in the message dialog to navigate to the proper directory (C:\Program
Files\MapInfo\AnySite_XX\Data\AGS\Freeway for example) and then click OK to close the dialog.
Note There are two known issues regarding drive time upon selecting the drive time icon on your AnySite toolbar. If you
receive a message pertaining to the ‘TEMP directory contain a dot in the path’ you will need to do the following two
steps. First, check to see if you have a folder named TEMP at the root directory C:\, if not then Click New Folder and
name the folder TEMP. Second, launch the Configurator, click Tools > Edit Application.ini file and search the file for
‘tempdir’. Remove the semicolon ‘ ;Tempdir=-C:\Temp’. Save the file, close configurator, and re-launch AnySite.
* User must have write access o the directory in order to make these changes.