Pitney Bowes AnySite - Manual (Page 28)

28 AnySite v9 Install Guide
Installing the Data License File
A unique license ships with your copy of AnySite to give you access to the data you purchased. This license is on a license CD that is
included with your AnySite media.
To install the data license file:
1. Place the License CD in the media drive.
AutoPlay screen displays, select Open Folder to View Files and double click the Install.exe file.
If the AutoPlay screen does not automatically start, click Run from the Microsoft Start menu, and click the
Browse button. Go to the media drive and select INSTALL.EXE.
2. In the License Installer screen click Install to copy the license file to the AnySite installation location (C:\Program
Files\MapInfo\AnySite_XX\Data\ASDE for example).
A Notice dialog appears. Click OK when prompted that the installation is complete.
If you selected a single user setup installation, continue to Final System Configuration on page 31.
If you select a multiple user setup installation or you installed to the Windows 2003 operating system, continue to In-
stalling the AnySite Client instructions.
Installing the AnySite Client
The AnySite Client allows a user to access the AnySite application.
Single User Installations:
If you selected a Single setup type installation on Windows XP, then you do not have to install the AnySite Client. The
Client installs by default for you. Skip to Final System Configuration on page 31.
If you installed on Windows 2003 server then you must install the Client. Follow the instructions in the next section
Launching the AnySite Client Setup Wizard on page 29.
Multiple User Installations:
If you selected a Shared (network) setup type, so that multiple users can access AnySite, then install the AnySite Client
on each machine that will access AnySite.
The AnySite Client Installer is a ClientSetup.exe file located under the AnySite installation folder (C:\Program
Files\MapInfo\AnySite_XX by default). Map the drive to the AnySite installation folder where the user will be running
AnySite from, and then run the ClientSetup.exe file from the client machine (as described in the next section Launching
the AnySite Client Setup Wizard).
Map a drive on each client machine using the same map drive letter. After running the Client installation on each client
machine, run the final system setup as described under Final System Configuration on page 31.
The mapped drive is only required for the installation process. Use UNC to run the application from a network.
Note The Client setup creates shortcuts pointing to the mapped drive not the UNC.