Rocktron Utopia B200 - Manual (Page 39)

39
6. TAP QUANTIZING Function
Select Sixteen, Eighth, Triplet, Quarter, Half, Whole or NONE for Delay 1
Select Sixteen, Eighth, Triplet, Quarter, Half, Whole or NONE for Delay 2
DELAY 1
DELAY 2
The TAP QUANTIZING function allows you to select a TAP rate for the delay preset. When in 2nd
Function Mode you can use the Tap Button (Preset button 3) to set the rate of the delay. This is ideal
when playing live and you would like to change the delay rate in real time without missing a beat!
The Tap Quantizing can be set (or fixed) for each preset. When pressing the TAP button 4 consecu-
tive times at the tempo you want the delay will automatically be quantized to one of the selected TAP
Button Parameters as shown below. The Yellow TAP LED will flash to indicate the quantized delay rate.
Here is a table showing what the delay quantizing means::
SIXTEEN One-Quarter of the time between taps (16th Note)
EIGHTH One-half of the time between taps (8th Note)
TRIPLET Two-thirds of the time between taps (Triplet)
QUARTER Equal to the time between taps (1/4 Note)
HALF Two times the amount of time between taps (1/2 note)
WHOLE Four times the amount of time between taps (Whole Note)
NONE No Tapping
The PARAMETER SELECT will allow you to access these TAP QUANTIZING parameters: