Rocktron Utopia B200 - Manual (Page 60)

60
Any or all of the B200's presets may be dumped to another B200, a sequencer or MIDI utility program
using a PC MIDI interface to create a ( .syx ) file. This file may be uploaded to the Rocktron website to
share with other users. All the information about the presets you have created will be dumped consist-
ing of parameter values, title characters and controller assignments. When dumping a single preset into
another B200, the dumped preset can be loaded into any preset location on the receiving unit.
Note: The B200 MIDI data when sent by external means such as a PC MIDI utility program you will
need to configure it as stated below.
Buffer size 264 bytes
No of buffers 16 both RX and TX
100ms between buffers be used initially as a starting point.
100ms after F7 [ optional ]
If a Midi sequencer is used to store the data record the Sysex data in real-time or adhere to the param-
eters given above.
8. MIDI DUMP/LOAD
Step 2
Step 3
M I D I D U M P / L O A D
1 8 P R E D U M P / L O A D
Step 1 Connect a standard MIDI cable from the MIDI OUT of the transmitting B200 to the
MIDI IN of the receiving B200. Consult MIDI Connection drawing for more infor-
mation
If you are dumping a single preset to another B200, the transmitting B200 must have
that preset selected.
Turn FUNCTION SELECT knob to MIDI DUMP/LOAD.
Step 4 On the receiving B200 use the PRESET Select control to select the preset location
where the received preset will be stored. Note that the preset currently stored at the
selected location will be lost when the new preset is received.