Rocktron Utopia B200 - Manual (Page 68)

68
Step 5 You now must store your changes. If you have made any changes to any parameter, the LED
above the "STORE" button will light. Press the STORE button to save the changes you have
made. "STORE AT PRESET" will flash intermittently with the current preset. If you would
like to save this change to the current preset, press the STORE button again. To save this ad-
justed preset (and the parameters you have just changed) to a different preset location, use the
PRESET SELECT knob to choose the preset destination and then press the STORE button
again. Note that doing this will "over-write" the preset location you are saving to.
NOTE: To exit Pedal Controllers at any time or cancel any changes you have made, turn
either the PRESET or FUNCTION SELECT knob. The word CANCEL will flash on the display
and then return you to the preset you were working on.
b 1 2 d r e a m d r e a m
S T O R E A T P R E S E T
b 1 2 d r e a m d r e a m
3 7 f l a - D L Y - R E V
b 1 2 d r e a m d r e a m
c a n c e l
b 1 2 d r e a m d r e a m
3 7 f l a - D L Y - R E V
8. Pedal Status......continued.............